Silicone Cold Shrink Tube for 4.3-10 RF Connector


Cold shrink tube is designed for weatherproofing protection on connections between jumper cable and connector (7-16 DIN, N type or 4.3-10) of wireless equipment, such as RRU, Antenna and Microwave. Comparing with tape sealing protection, cold shrink tube installation is much shorter (15-30 seconds), convenient installation, uniform appearance for acceptance.

Product Features

» Easy and quick installation

»No requiere herramientas ni calor

»Proporciona una buena estabilidad térmica

»Se adapta a una amplia gama de tamaños de cables

»Excelente resistencia al desgarro

» UV and ozone aging resistant

Note: In certain applications, a foam tape will be needed for smaller cable diameter that cannot be covered with the tube range, the foam tape is used to increase the smaller cable diameter and assure the sealing of clod shrink tube.

instalación de encogimiento en frío

 

Properties

ItemParameter and ResultTest Method
ImpermeableClassPass, IPX7IEC 60529:1989/AMD2:2013/COR1:2019

1 meter depth in water, duration: 30 minutes

Physical and mechanical propertiesShore HardnessA/41/1ASTM D2240-15
Fuerza de Tensión9.66 MPaASTM D412-16 Method A
Elongation930%ASTM D412-16 Method A
Resistencia al desgarre28.4 N/mmASTM D624-00
Brittleness Temperature by ImpactPasarASTM D746-14,-60℃
Drop TestPasar

No damage, deformation, and support tube could be pulled out normally

Drop from height 1.2m on tile floor surface, 3 times to test
FlammabilityHorizontal BurningHBUL 94-2013 Rev.14-2022 Section 7
ElectricityResistencia dieléctrica19.10 KV/mmASTM D149-20 Method A
Performance under harsh environmentMechanical and Waterproof PropertiesNo crack, discoloration, damage or deformation,

IPX7 Pass

 

1. Dry heat test (IEC 60068-2-2:2008 Test Bb): 90±2℃,168 hours;

2. Low temperature test (IEC 60068-2-1:2008Test Ab): -40±2℃,168 hours;

3. Thermal cycling test: Cycle time:12h/cycle, Cycle index: 10 cycles, Total duration: 120 hours;

4. Damp heat test, cyclic test (IEC 60068-2-30:2005 Test Db):Cycle time:24h/cycle, Cycle index: 10 cycles, Total duration: 240 hours;

5. Damp heat test, steady state (IEC 60068-2-78:2012 Test Cab):Temperature: 75±2℃, Humidity:(95±1) %RH, Total duration: 1000 hours

Aging TestLight Aging Test-UV ExposureNo crack, discoloration, damage or deformation

Grey scale: 4-5

IPX7 Pass

ISO 4892-3:2016Cycle1& ISO 105-A02:1993/Cor.2:2005

Lamp type: UVA-340, 8h UV at (60±3)℃ BPT,0.76W/(m²×nm)@340nm

4h condensation at(50±3)℃ BPT

Exposure duration:1000 hours

Ozone AgingNo crack, discoloration, damage or deformation,

IPX7 Pass

ASTM D1149-16 Method B procedure B1

Temperature: 40±1℃

Ozone concentration:50±5 pphm

Exposure duration: 72 hours

Hailstone Resistant TestNo crack,damage or deformationIEC 61215,φ20mm hailstone falling
MaterialEnvironmental ProtectionRoHS

Reach

IEC 62321

SVHC

TemperaturaInstallation Temperature-40℃ ∼ 60℃Refer to “mechanical properties” and “performance under harsh environment”
Operation Temperature-60℃ ∼ 80℃
Stock Temperature-60℃ ∼ 80℃

 

Aplicaciones

»Proporciona una excelente protección física y sellado contra la humedad para conectores y cables de telecomunicaciones.

»Aplicación perfecta para conexiones de unidades de radio remotas.

»Reparación de cubiertas y cubiertas de cables.

»Protección contra la corrosión de racores y acoplamientos.

 

Informacion rapida


Product Name: Cold Shrink Tube
Product Code: CST28-110-4310
Material: caucho de silicona
Inner Diameter of Plastic Core: 28mm
Diameter (after shrink): 8mm
Length (after shrink): 110mm
Application: Sealing 4.3-10 or N type connector to 1/2" cable
MOQ: 1000
Muestra ofrecida: Gratis a nuestro costo
Método de envío: vía marítima, vía aérea, DHL, UPS, FedEx, etc.
Puerto de envío: Shanghai, China

Tubo termorretráctil de caucho de silicona para conector 5G Nex10