Weatherproofing Cold Shrink Tube for 6-15mm Connection
Cold shrink tube is designed for weatherproofing protection on connections between jumper cable and connector (7-16 DIN, N type or 4.3-10) of wireless equipment, such as RRU, Antenna and Microwave. Comparing with tape sealing protection, cold shrink tube installation is much shorter (15-30 seconds), convenient installation, uniform appearance for acceptance.
Caractéristiques
» High elastic silicone rubber tube structure with mastic built-in for better weatherproofing protection;
» Stable and long life during operation;
» Fast installation, only 15-30 seconds needed to seal one connection;
» Perfect SWR performance approved by telecom operators;
» Good operating capability under extreme cold and hot condition, anti-UV, anti-ozone;
» Much time and labor cost saving;
Properties
| Item | Parameter and Result | Test Method | |
| Étanche | Class | Pass, IPX7 | IEC 60529:1989/AMD2:2013/COR1:2019 1 meter depth in water, duration: 30 minutes |
| Physical and mechanical properties | Shore Hardness | A/41/1 | ASTM D2240-15 |
| Résistance à la traction | 9.66 MPa | ASTM D412-16 Method A | |
| Elongation | 930% | ASTM D412-16 Method A | |
| La force des larmes | 28.4 N/mm | ASTM D624-00 | |
| Brittleness Temperature by Impact | Passer | ASTM D746-14，-60℃ | |
| Drop Test | Passer No damage, deformation, and support tube could be pulled out normally | Drop from height 1.2m on tile floor surface, 3 times to test | |
| Flammability | Horizontal Burning | HB | UL 94-2013 Rev.14-2022 Section 7 |
| Electricity | Résistance diélectrique | 19.10 KV/mm | ASTM D149-20 Method A |
| Performance under harsh environment | Mechanical and Waterproof Properties | No crack, discoloration, damage or deformation, IPX7 Pass
| 1. Dry heat test (IEC 60068-2-2:2008 Test Bb): 90±2℃，168 hours; 2. Low temperature test (IEC 60068-2-1:2008Test Ab): -40±2℃，168 hours； 3. Thermal cycling test: Cycle time:12h/cycle, Cycle index: 10 cycles, Total duration: 120 hours; 4. Damp heat test, cyclic test (IEC 60068-2-30:2005 Test Db)：Cycle time:24h/cycle, Cycle index: 10 cycles, Total duration: 240 hours; 5. Damp heat test, steady state (IEC 60068-2-78:2012 Test Cab)：Temperature: 75±2℃, Humidity：(95±1) %RH, Total duration: 1000 hours |
| Aging Test | Light Aging Test-UV Exposure | No crack, discoloration, damage or deformation Grey scale: 4-5 IPX7 Pass | ISO 4892-3:2016Cycle1& ISO 105-A02:1993/Cor.2:2005 Lamp type: UVA-340, 8h UV at (60±3)℃ BPT，0.76W/(m²×nm)@340nm 4h condensation at(50±3)℃ BPT Exposure duration:1000 hours |
| Ozone Aging | No crack, discoloration, damage or deformation, IPX7 Pass | ASTM D1149-16 Method B procedure B1 Temperature: 40±1℃ Ozone concentration:50±5 pphm Exposure duration: 72 hours | |
| Hailstone Resistant Test | No crack,damage or deformation | IEC 61215,φ20mm hailstone falling | |
| Matériel | Environmental Protection | RoHS Reach | IEC 62321 SVHC |
| Température | Installation Temperature | -40℃ ∼ 60℃ | Refer to “mechanical properties” and “performance under harsh environment” |
| Operation Temperature | -60℃ ∼ 80℃ | ||
| Stock Temperature | -60℃ ∼ 80℃ | ||
Applications
»Fournit une excellente protection physique et une excellente étanchéité à l'humidité pour les connecteurs et câbles de télécommunications.
»Application parfaite pour les connexions d'unités radio à distance.
»Réparation des gaines et gaines de câbles.
»Protection anticorrosion des raccords et accouplements.
Specification
Product Name: Cold Shrink Tube
Product Code: CST18-200-6
Matériel: caoutchouc de silicone
Inner Diameter of Plastic Core: 18mm
Diameter (after shrink): 6mm
Length (after shrink): 200mm
Application: Sealing 6-15mm connection
MOQ: 1000
Échantillon offert: gratuit à nos frais
Méthode d'expédition: voie maritime, voie aérienne, DHL, UPS, FedEx, etc.
Port d'expédition: Shanghai, Chine
