Silicone Cold Shrink Wrap 25-70mm

Cold shrink wrap is a specially formulated tubular rubber sleeve pre-expanded on a removable plastic cylinder for easy installation. It does not require heat to shrink, you just need to pull the plastic cord, and then the silicone rubber tubing will shrink rapidly and grip around the cable tightly, which will provide a reliable, long-term sealing and protection to the connector.

Caractéristiques

» Easy and quick installation

»Ne nécessite aucun outil ni chaleur

»Fournit une bonne stabilité thermique

»Convient à une large gamme de tailles de câbles

»Excellente résistance à la déchirure

» UV and ozone aging resistant

Note: In certain applications, a foam tape will be needed for smaller cable diameter that cannot be covered with the tube range, the foam tape is used to increase the smaller cable diameter and assure the sealing of clod shrink tube.

Properties

Item		Parameter and Result	Test Method
Étanche	Class	Pass, IPX7	IEC 60529:1989/AMD2:2013/COR1:2019 1 meter depth in water, duration: 30 minutes
Physical and mechanical properties	Shore Hardness	A/41/1	ASTM D2240-15
	Résistance à la traction	9.66 MPa	ASTM D412-16 Method A
	Elongation	930%	ASTM D412-16 Method A
	La force des larmes	28.4 N/mm	ASTM D624-00
	Brittleness Temperature by Impact	Passer	ASTM D746-14，-60℃
	Drop Test	Passer No damage, deformation, and support tube could be pulled out normally	Drop from height 1.2m on tile floor surface, 3 times to test
Flammability	Horizontal Burning	HB	UL 94-2013 Rev.14-2022 Section 7
Electricity	Résistance diélectrique	19.10 KV/mm	ASTM D149-20 Method A
Performance under harsh environment	Mechanical and Waterproof Properties	No crack, discoloration, damage or deformation, IPX7 Pass	1. Dry heat test (IEC 60068-2-2:2008 Test Bb): 90±2℃，168 hours; 2. Low temperature test (IEC 60068-2-1:2008Test Ab): -40±2℃，168 hours； 3. Thermal cycling test: Cycle time:12h/cycle, Cycle index: 10 cycles, Total duration: 120 hours; 4. Damp heat test, cyclic test (IEC 60068-2-30:2005 Test Db)：Cycle time:24h/cycle, Cycle index: 10 cycles, Total duration: 240 hours; 5. Damp heat test, steady state (IEC 60068-2-78:2012 Test Cab)：Temperature: 75±2℃, Humidity：(95±1) %RH, Total duration: 1000 hours
Aging Test	Light Aging Test-UV Exposure	No crack, discoloration, damage or deformation Grey scale: 4-5 IPX7 Pass	ISO 4892-3:2016Cycle1& ISO 105-A02:1993/Cor.2:2005 Lamp type: UVA-340, 8h UV at (60±3)℃ BPT，0.76W/(m²×nm)@340nm 4h condensation at(50±3)℃ BPT Exposure duration:1000 hours
Aging Test	Ozone Aging	No crack, discoloration, damage or deformation, IPX7 Pass	ASTM D1149-16 Method B procedure B1 Temperature: 40±1℃ Ozone concentration:50±5 pphm Exposure duration: 72 hours
	Hailstone Resistant Test	No crack,damage or deformation	IEC 61215,φ20mm hailstone falling
Matériel	Environmental Protection	RoHS Reach	IEC 62321 SVHC
Température	Installation Temperature	-40℃ ∼ 60℃	Refer to “mechanical properties” and “performance under harsh environment”
	Operation Temperature	-60℃ ∼ 80℃
	Stock Temperature	-60℃ ∼ 80℃

Applications

»Fournit une excellente protection physique et une excellente étanchéité à l'humidité pour les connecteurs et câbles de télécommunications.

»Application parfaite pour les connexions d'unités radio à distance.

»Réparation des gaines et gaines de câbles.

»Protection anticorrosion des raccords et accouplements.

Information rapide

Product Name: Silicone Cold Shrink Wrap
Product Code: CST75-150-25
Matériel: caoutchouc de silicone
Inner Diameter of Plastic Core: 75mm
Diameter (after shrink): 25mm
Length (after shrink): 150mm
Application: Sealing 25-70mm connections
MOQ: 1000
Échantillon offert: gratuit à nos frais
Méthode d'expédition: voie maritime, voie aérienne, DHL, UPS, FedEx, etc.
Port d'expédition: Shanghai, Chine

Silicone Cold Shrink Wrap 25-70mm