Weatherproofing Cold Shrink Tube for 9-30mm Connection


Cold shrink tube is designed for weatherproofing protection on connections between jumper cable and connector (7-16 DIN, N type or 4.3-10) of wireless equipment, such as RRU, Antenna and Microwave. Comparing with tape sealing protection, cold shrink tube installation is much shorter (15-30 seconds), convenient installation, uniform appearance for acceptance.

fitur

» High elastic silicone rubber tube structure with mastic built-in for better weatherproofing protection;

» Stable and long life during operation;

» Fast installation, only 15-30 seconds needed to seal one connection;

» Perfect SWR performance approved by telecom operators;

» Good operating capability under extreme cold and hot condition, anti-UV, anti-ozone;

» Much time and labor cost saving;

 

Properties

ItemParameter and ResultTest Method
Tahan airClassPass, IPX7IEC 60529:1989/AMD2:2013/COR1:2019

1 meter depth in water, duration: 30 minutes

Physical and mechanical propertiesShore HardnessA/41/1ASTM D2240-15
Kekuatan tarik9.66 MPaASTM D412-16 Method A
Elongation930%ASTM D412-16 Method A
Kekuatan Robek28.4 N/mmASTM D624-00
Brittleness Temperature by ImpactLulusASTM D746-14,-60℃
Drop TestLulus

No damage, deformation, and support tube could be pulled out normally

Drop from height 1.2m on tile floor surface, 3 times to test
FlammabilityHorizontal BurningHBUL 94-2013 Rev.14-2022 Section 7
ElectricityKekuatan Dielektrik19.10 KV/mmASTM D149-20 Method A
Performance under harsh environmentMechanical and Waterproof PropertiesNo crack, discoloration, damage or deformation,

IPX7 Pass

 

1. Dry heat test (IEC 60068-2-2:2008 Test Bb): 90±2℃,168 hours;

2. Low temperature test (IEC 60068-2-1:2008Test Ab): -40±2℃,168 hours;

3. Thermal cycling test: Cycle time:12h/cycle, Cycle index: 10 cycles, Total duration: 120 hours;

4. Damp heat test, cyclic test (IEC 60068-2-30:2005 Test Db):Cycle time:24h/cycle, Cycle index: 10 cycles, Total duration: 240 hours;

5. Damp heat test, steady state (IEC 60068-2-78:2012 Test Cab):Temperature: 75±2℃, Humidity:(95±1) %RH, Total duration: 1000 hours

Aging TestLight Aging Test-UV ExposureNo crack, discoloration, damage or deformation

Grey scale: 4-5

IPX7 Pass

ISO 4892-3:2016Cycle1& ISO 105-A02:1993/Cor.2:2005

Lamp type: UVA-340, 8h UV at (60±3)℃ BPT,0.76W/(m²×nm)@340nm

4h condensation at(50±3)℃ BPT

Exposure duration:1000 hours

Ozone AgingNo crack, discoloration, damage or deformation,

IPX7 Pass

ASTM D1149-16 Method B procedure B1

Temperature: 40±1℃

Ozone concentration:50±5 pphm

Exposure duration: 72 hours

Hailstone Resistant TestNo crack,damage or deformationIEC 61215,φ20mm hailstone falling
BahanEnvironmental ProtectionRoHS

Reach

IEC 62321

SVHC

SuhuInstallation Temperature-40℃ ∼ 60℃Refer to “mechanical properties” and “performance under harsh environment”
Operation Temperature-60℃ ∼ 80℃
Stock Temperature-60℃ ∼ 80℃

 

Aplikasi

»Memberikan perlindungan fisik yang sangat baik dan penyegelan kelembapan untuk konektor dan kabel telekomunikasi.

»Aplikasi sempurna untuk koneksi unit radio jarak jauh.

»Perbaikan jaket kabel dan selubung.

»Perlindungan korosi untuk fitting dan kopling.

 

Specification


Product Name: Cold Shrink Tube
Product Code: CST35-150-9
Bahan: karet silikon
Inner Diameter of Plastic Core: 35mm
Diameter (after shrink): 9mm
Length (after shrink): 150mm
Application: Sealing 9-30mm connection
MOQ: 1000
Sampel yang Ditawarkan: Gratis dengan biaya kami
Metode Pengiriman: Jalur laut, jalur udara, DHL, UPS, FedEx, dll.
Pelabuhan Pengiriman: Shanghai, Cina

ModelWarnaAplikasiPackage
CSTM125-DINBlack or Grey7-16 DIN connector to 1/2" jumper100 pcs/carton
CSTM110-4310Black or Grey4.3-10 or N type connector to 1/2" jumper100 pcs/carton
CSTM150-1278Black or Grey7/8" feeder to 1/2" jumper100 pcs/carton
cold shrink tube supplier
Order Quality Cold Shrink Tubing from Volda!