Silicone Cold Shrink Wrap 19-55mm
Cold Shrink Wrap is a specially formulated tubular rubber sleeve pre-expanded on a removable plastic cylinder for easy installation. It does not require heat to shrink, you just need to pull the plastic cord, and then the silicone rubber tubing will shrink rapidly and grip around the cable tightly, which will provide a reliable, long-term sealing and protection to the connector.
풍모
» Easy and quick installation
»도구 나 열이 필요하지 않습니다.
»우수한 열 안정성 제공
»다양한 케이블 크기 수용
»우수한 찢김 방지
» UV and ozone aging resistant
Note: In certain applications, a foam tape will be needed for smaller cable diameter that cannot be covered with the tube range, the foam tape is used to increase the smaller cable diameter and assure the sealing of clod shrink tube.
Properties
Item | Parameter and Result | Test Method | |
방수 | Class | Pass, IPX7 | IEC 60529:1989/AMD2:2013/COR1:2019 1 meter depth in water, duration: 30 minutes |
Physical and mechanical properties | Shore Hardness | A/41/1 | ASTM D2240-15 |
인장 강도 | 9.66 MPa | ASTM D412-16 Method A | |
Elongation | 930% | ASTM D412-16 Method A | |
인열 강도 | 28.4 N/mm | ASTM D624-00 | |
Brittleness Temperature by Impact | 통과하다 | ASTM D746-14,-60℃ | |
Drop Test | 통과하다 No damage, deformation, and support tube could be pulled out normally | Drop from height 1.2m on tile floor surface, 3 times to test | |
Flammability | Horizontal Burning | HB | UL 94-2013 Rev.14-2022 Section 7 |
Electricity | 유전체 강도 | 19.10 KV/mm | ASTM D149-20 Method A |
Performance under harsh environment | Mechanical and Waterproof Properties | No crack, discoloration, damage or deformation, IPX7 Pass
| 1. Dry heat test (IEC 60068-2-2:2008 Test Bb): 90±2℃,168 hours; 2. Low temperature test (IEC 60068-2-1:2008Test Ab): -40±2℃,168 hours; 3. Thermal cycling test: Cycle time:12h/cycle, Cycle index: 10 cycles, Total duration: 120 hours; 4. Damp heat test, cyclic test (IEC 60068-2-30:2005 Test Db):Cycle time:24h/cycle, Cycle index: 10 cycles, Total duration: 240 hours; 5. Damp heat test, steady state (IEC 60068-2-78:2012 Test Cab):Temperature: 75±2℃, Humidity:(95±1) %RH, Total duration: 1000 hours |
Aging Test | Light Aging Test-UV Exposure | No crack, discoloration, damage or deformation Grey scale: 4-5 IPX7 Pass | ISO 4892-3:2016Cycle1& ISO 105-A02:1993/Cor.2:2005 Lamp type: UVA-340, 8h UV at (60±3)℃ BPT,0.76W/(m²×nm)@340nm 4h condensation at(50±3)℃ BPT Exposure duration:1000 hours |
Ozone Aging | No crack, discoloration, damage or deformation, IPX7 Pass | ASTM D1149-16 Method B procedure B1 Temperature: 40±1℃ Ozone concentration:50±5 pphm Exposure duration: 72 hours | |
Hailstone Resistant Test | No crack,damage or deformation | IEC 61215,φ20mm hailstone falling | |
재료 | Environmental Protection | RoHS Reach | IEC 62321 SVHC |
온도 | Installation Temperature | -40℃ ∼ 60℃ | Refer to “mechanical properties” and “performance under harsh environment” |
Operation Temperature | -60℃ ∼ 80℃ | ||
Stock Temperature | -60℃ ∼ 80℃ |
응용
»통신 커넥터 및 케이블을위한 우수한 물리적 보호 및 습기 밀봉을 제공합니다.
»원격 무선 장치 연결을위한 완벽한 응용 프로그램입니다.
»케이블 재킷 및 외장 수리.
»피팅 및 커플 링의 부식 방지.
빠른 정보
Product Name: Silicone Cold Shrink Wrap
Product Code: CST60-140-19
자료 : 실리콘 고무
Inner Diameter of Plastic Core: 60mm
Diameter (after shrink): 19mm
Length (after shrink): 140mm
Application: Sealing 19-55mm connections
MOQ : 1000 년
샘플 제공 : 무료
배송 방법 : Sea way, air way, DHL, UPS, FedEx, etc.
선적항 : 중국 상하이